Category Archives: Bronze Letters

120mm High Bronze Letters

Bronze Letters

120mm high bronze letters, 3mm thick, custom cut from customers own vector artwork. Supplied with simplefix fixings for use at an exhibition and at events. Sign letters were for interior use although the letters are primarily designed for long lasting exterior applications.

120mm high brushed face bronze letters. 3mm thick.

Patina Bronze Letters

Bronze Letters, , , , ,

Traditional patina bronze lettering. Example shows a letter ‘L’ 4″ (100mm) high, in an Old English text font, cut from solid 3.2mm bronze with a patina finish. Letters are supplied with stainless steel threaded rod fixings on the back. Any font may be custom cut to order in various sizes depending on your requirements. Contact Arro Signs for an estimate. A Minimum purchase order of £100 would be required on these products due to the cost of production.

Please be aware, the patina finish varies from one batch of letters to the next due to the nature of bronze and the chemical ageing process.

solid-bronze-letters-patinafinish

Example below shows a sample of solid cast bronze with a patina finish.

cast-bronze-patina

Example below shows a cast bronze letter with a verdigris finish. Patina bronze. 50mm high, 10mm thick, Times New Roman.

bronze-letters-verdigris-finish-50mmhigh-10mmthick-p

Feel free to contact us by email for an estimate on your architectural bronze sign letter requirement. sales@arro-signs.co.uk

  • 2″ high letter F
  • 50mm high, 10mm thick, bronze
  • 6″ high letters
  • 6″ high letter S
  • 6″ high letter E
  • 6″ high bronze letters
  • 6″ high letter N
Please Share:

Bronze Letters – Brushed Face

Bronze Letters, Metal Letters, , ,
Bronze Letters. Bronze letters are cut from 3mm or 6mm thick solid bronze.
Letters are also made from cast bronze to a varied depth depending on the size of the letters. Available in polished or brushed finish and clear polyurethane coated.
Rod fixings are fitted to the back for wall fixing.

We have two standard fonts available, Helvetica and Times New Roman. Other fonts are available.


 brushed-Satin-Bronze
The colour of the letters appears to vary depending on the lighting conditions, the photos above were taken in a studio
while the image below was taken outside on a sunny day.
The rods on the back of the letters are made from 4mm threaded stainless steel embedded into the bronze.
Bronze letters are recommended for use with property name signs where the name of the building will not be changed.
Letters are permanent and are very difficult to remove if no longer required.
These letters not recommended for shop signs or for short term use.
Cast bronze letters are custom made to order.
Example shows a 6mm thick, flat cut brushed bronze letter with horizontal grain.
We usually do horizontal grain as standard.

The above image is a better example of the colour of the bronze. We have had difficulty trying to get an accurate representation of the bronze colour.
To get a price please send us you requirements by email or give us a call.